Masonry to Steel

Column Anchors

Weld-On

Ties masonry to steel columns. Welded.

Standard Size:

  • 1/4″ DIA. X 9″ Long

Finish:

  • Mill Galvanized
COLUMN ANCHORS Weld On Column Anchors Weld-On
COLUMN ANCHORS Weld On Column Anchors Weld-On

Screw-On

Ties masonry to steel columns. Mechanically fastened – Screw on or use Power Actuated Tool.

Standard Size:

  • 12 Gauge plate X 3/4″ X 9″ long

Finish:

  • Mill Galvanized
  • Hot Dip
Column Anchors Screw-On
COLUMN ANCHORS Weld On Column Anchors Screw-On

Triangular Ties

Embeddable triangular ties compatible with T-III anchors.

Standard Sizes:
Standard 3/16″ diameter (.187 in) x length

  • 3/16″ x 3″
  • 3/16″ x 4″
  • 3/16″ x 5″
  • 3/16″ x 6″
  • 3/16″ x 7″
  • 3/16″ x 9″
  • 3/16″ x 11″

Finish:

  • Hot Dip
Triangular Anchor Ties

Notched Column Anchor

(Single Bend)

Ties CMU to vertical steel columns.

Standard Size:

  • 2″ wide X 1/8″ thick X 7″ long with 1-1/2″ bend (Right or Left)

Finish:

  • Mill Galvanized
Notched Column Anchor
Notched Column Anchor

Notched Column Anchor

(Corrugated)

Ties CMU to vertical steel columns.

Standard Size:

  • 2″ wide X 1/8″ thick X 7″ long corrugated (Right or Left)

Finish:

  • Mill Galvanized
Notched Column Anchor
Notched Column Anchor

Beam Anchors

Weld-On

Ties masonry to steel columns. Welded.

Standard Size:

  • 1/4″ DIA. X 9″ Long

Finish:

  • Mill Galvanized
COLUMN ANCHORS Weld On Column Anchors Weld-On
COLUMN ANCHORS Weld On Column Anchors Weld-On

Screw-On

Ties masonry to steel columns. Mechanically fastened – Screw on or use Power Actuated Tool.

Standard Size:

  • 12 Gauge plate X 3/4″ X 9″ long

Finish:

  • Mill Galvanized
  • Hot Dip
Column Anchors Screw-On
COLUMN ANCHORS Weld On Column Anchors Screw-On

Partition Top Anchor (PTA)

Provides lateral shear resistance at upper limit of walls. Permits vertical movement of slab above, without transferring compression loads to wall below. Plastic tube with expansion filler is placed over rod anchor to allow deflection. Joint is filled with mortar, fully surrounding the tube.

Column Anchors Screw-On
COLUMN ANCHORS Weld On Column Anchors Screw-On

Masonry to Masonry

Intersecting CMU Walls

Mesh Tie

Ties masonry to masonry for structural (load bearing) & non-structural intersecting CMU walls.

Standard (IBC) Size:

  • 16 gauge – 1/2″ sq x 6″ x 14″
  • Other sizes available

Finish:

  • Hot Dip
COLUMN ANCHORS Weld On Column Anchors Weld-On
COLUMN ANCHORS Weld On Column Anchors Weld-On

Z-Strap

Only necessary, in the very rare case, where intersecting CMU walls develop flange action (shear transfer).

Standard (IBC) Size:

  • 1 1/2″ x 1/4″ x 2″ x 24″ x 2″
  • Other sizes available – Call 1-800-659-4731 or sales@masonpro.com

Finish:

  • Brite (Plain) – Interior
  • Hot Dip – Exterior
COLUMN ANCHORS Weld On Column Anchors Weld-On
COLUMN ANCHORS Weld On Column Anchors Weld-On